Rockwool Home Energy Audit in Georgetown: What to Know First
We provide independent Rockwool home energy audit in Georgetown, typically completing the full diagnostic and written report within a single visit. Most audits run between $350 and $650 depending on home size and whether duct-leakage testing is included. We do not start any work without a written price, and we do not sell insulation until the blower-door numbers show where the air is actually escaping.
This page is for Georgetown homeowners who have Rockwool insulation installed - typically Comfortbatt in walls, Safe’n’Sound in interior partitions, or Toprock in attic applications - and need to know whether their building envelope is performing as intended. If your upstairs never cools below 78°F in July, or your energy bills spiked after a remodel in Sun City or near the San Gabriel River corridor, the problem is usually air movement through gaps the insulation cannot see. Call (254) 970-2136 for a free estimate.
How Rockwool Products Fail - and How We Fix Them
- Comfortbatt compression in 2×6 stud bays. Comfortbatt is designed to friction-fit at full loft, but Georgetown framers working fast in summer heat often compress it during install, dropping the effective R-value from R-23 to R-18 or lower. We measure the actual depth with a borescope and recalculate the installed R-value against the labeled spec. If compression is the issue, we remove and reinstall at proper density or recommend a blown-in alternative for irregular cavities.
- Safe’n’Sound installed without air sealing in interior walls. Safe’n’Sound excels at acoustic dampening, but it is not an air barrier. In homes near I-35 or the airport flight path, we find it stuffed into chase walls that connect attic to basement or crawl space, pulling unconditioned air through the house. We seal top plates and bottom plates with foam before reinstalling, then verify with a blower-door test.
- Toprock displacement in vented attics above 140°F. Toprock’s mineral-wool structure handles heat that melts fiberglass binders, but in Georgetown attics it can shift on sloped ceilings if friction-fit alone was relied upon. We find batts slid downslope, exposing ridge areas. Our fix: mechanical fastening with proper supports, plus air sealing of all penetrations before reinstalling. Seal the holes first. Then we talk about R-value.
- Rockwool-to-drywall gaps from seasonal shrinkage. Unlike cellulose, Rockwool does not settle much, but the wood framing around it shrinks and swells. In 2018-2022 builds in Georgetown’s Wolf Ranch and Rancho Sienna, we see 1/4-inch gaps at perimeter studs that become thermal bypass channels. We map these with thermal imaging, then seal with compatible foam and reinstall batts to full contact.
- False confidence in Rockwool’s fire resistance masking air leaks. Homeowners sometimes assume mineral wool’s non-combustibility means the envelope is tight. It does not. We have tested homes with pristine Rockwool installations reading 3,800 CFM50 on the blower door - nearly double what a sealed envelope should show. The fix is never more insulation; it is finding the leaks the insulation is hiding.
Our Rockwool Home Energy Audit Process
- 1
Call and scheduling. A live person answers, 24/7. We ask square footage, age of home, specific complaints, and whether Rockwool was original or retrofit. You get a named technician and a text when they are en route - Haven Standard: Arrive on schedule.
- 2
Visual and thermal inspection. We walk the attic and crawl space with a FLIR camera, documenting Rockwool placement, compression, displacement, and gaps. Photos go into your file automatically.
- 3
Blower-door test. We depressurize the house to -50 Pascals and record CFM50 - the cubic feet per minute of air leakage at standard test pressure. This single number tells us whether the problem is envelope leakage or something else.
- 4
Duct-leakage test if indicated. In homes with attic ducts, we pressurize the duct system and measure leakage to outdoors. A common finding in Georgetown: 20-30% of conditioned air never reaches the rooms.
- 5
Written report and price. You receive documented photos, blower-door numbers, thermal images, and a flat written price for any recommended work. No work starts without it. Haven Standard Clause 1.
- 6
Post-work verification. If we perform air sealing or insulation adjustments, we rerun the blower door and publish before-and-after numbers. You keep the report.
Before
AfterWhat Rockwool Home Energy Audit Costs in Georgetown
Most Rockwool home energy audits in Georgetown fall in these ranges:
- Basic audit (blower door, thermal imaging, visual inspection): $350-$450 for homes under 2,500 square feet
- Standard audit (adds duct-leakage test, combustion safety check): $500-$650 for homes 2,500-4,000 square feet
- Large or multi-zone homes: $700-$900, quoted flat after a brief phone scope
What moves the price: home size, number of HVAC zones, accessibility of attic and crawl space, and whether we need to depressurize multiple duct systems. We also perform free second opinions on any written estimate from another contractor - bring us their scope and we will read it with you. Every audit includes a Documented Photo Record at no extra charge. Call (254) 970-2136 for an exact quote; estimates are free.
Why Georgetown Homeowners Call Topside Attic Insulation Georgetown for Rockwool Work
We are independently owned and operated under The Haven Standard since 2016, and we are not affiliated with or authorized by Rockwool - we are an independent Rockwool service provider. That independence matters because we specify what the house actually needs, not what a manufacturer catalog promotes.
Wes Okafor and our crew have worked attics from Sun City Georgetown to homes backing up to the San Gabriel River corridor. We know that a July attic here runs 135°F to 145°F, and that Rockwool’s mineral-wool structure handles that heat better than fiberglass - but only if the air sealing is done first. Our 365-Day Done Right Promise applies to all work, and we publish before-and-after blower-door numbers on every applicable job so you can verify the result yourself. We also service Reflectix and other brands, so if your audit reveals that Rockwool is not the right product for a specific application, we will say so directly.
FAQs
No. Rockwool’s product warranty covers manufacturing defects, not diagnostic testing. Our audit is non-destructive - we do not cut or remove batts unless you authorize repair work. If we do find a manufacturing issue, we document it so you can file a claim with Rockwool directly. Call (254) 970-2136 if you want us to review your warranty paperwork before scheduling.
Rockwool does not sell “parts” in the traditional sense - it sells batts, boards, and loose-fill. For repairs, we use current-stock Rockwool products or, when appropriate, compatible materials from Owens Corning, Johns Manville, or Knauf. We never lock you into a proprietary product. Our written scope specifies exactly what material goes where before any work starts.
Repair is usually cheaper if the Rockwool is in good condition and only needs repositioning, supplemental air sealing, or spot filling. Replacement makes sense when batts are water-damaged, heavily compressed, or contaminated. In Georgetown’s clay-soil areas with crawl-space moisture issues, we see more replacement calls near the San Gabriel River corridor than in Sun City’s drier built-up areas. We quote both options flat.
Most audits are scheduled within 48 hours and completed in 2 to 3 hours on site. Same-day scheduling is often available for urgent cases, such as a home under contract where the inspector flagged insulation performance. A live person answers calls 24/7, so you are not waiting on a callback window. Call (254) 970-2136 to check today’s availability.
You get a written report with blower-door CFM50 reading, thermal images with temperature annotations, photos of all accessible Rockwool installations, a flat written price for any recommended work, and - if we perform work - before-and-after blower-door numbers. This is your documented record, delivered before the crew leaves. Haven Standard: Have it in writing.
Ready to find out what your Rockwool installation is actually doing? Call (254) 970-2136 for a free estimate. A live person will answer, and we will have you scheduled with a written price in hand before any work starts.
Written by Wes Okafor, Owner, Topside Attic Insulation Georgetown at Topside Attic Insulation Georgetown, serving Georgetown and nearby areas.