Insulation in Camp Swift, TX
Crawl space encapsulation and vapor barrier work in Camp Swift runs between $2,800 and $6,500 for most homes, with full encapsulations on larger post-fire rebuilds toward the upper end. The Lost Pines humidity here traps moisture against foundations differently than drier Hill Country properties just 30 miles west, making vapor management a priority rather than an afterthought. We dispatch crews from our Austin office and carry CertainTeed and Icynene materials stocked for Bastrop County jobs. Call (254) 970-2136 for a written price before any work starts.
Why Camp Swift Homes Are Different
Camp Swift sits in a housing market split by disaster. The 2011 Bastrop County Complex Fire, the most destructive wildfire in Texas history at that time, burned through the Lost Pines forest and destroyed over 1,600 homes. The compressed rebuilding wave of 2012-2015 left a distinct cohort: structurally new homes insulated quickly by out-of-area crews working insurance timelines, many with R-19 blown fiberglass in attics spec’d for R-38 or higher. We see this pattern in the post-fire rebuilds clustered around the unincorporated Lost Pines communities, not in neighboring Elgin or Smithville.
The older stock matters too. Pre-2011 survivors, wood-frame ranch and farmhouse styles scattered through the area, often carry original fiberglass batts or no attic insulation at all. Combined with the Lost Pines ecosystem’s trapped humidity, which exceeds what drier Austin metro contractors expect, Camp Swift homes face a dual pressure: moisture migration from below and radiant heat gain from above. Summer temperatures exceeding 100°F push attic surfaces past 140°F, turning inadequate insulation into measurable cooling cost spikes.
Our Main Camp Swift Services
Camp Swift homeowners most often call us about attic performance and whole-home air sealing. These three services have dedicated Camp Swift pages with deeper detail:
Attic Insulation in Camp Swift
Attic insulation in Camp Swift addresses the two dominant housing eras differently: post-fire rebuilds with underspecified blown fiberglass need removal and correction, while pre-2011 homes often start from empty joist bays. We measure existing depth, check for top plate air leaks, and specify to R-38 or higher using Owens Corning or Johns Manville products. Every job gets a written price before work starts and a Documented Photo Record at completion. Attic Insulation in Camp Swift covers full pricing and process.
Spray Foam Insulation in Camp Swift
Spray foam insulation in Camp Swift works best for the complex rooflines and conditioned attics common in 2012-2015 rebuilds, where open-cell Icynene or closed-cell Demilec products create both an air barrier and thermal boundary in one application. The Lost Pines humidity makes vapor-closed assemblies particularly relevant for crawl spaces and rim joists. We publish before-and-after blower-door numbers on every applicable job. Spray Foam Insulation in Camp Swift has complete details.
Blown-In Insulation in Camp Swift
Blown-in insulation in Camp Swift serves both retrofit and correction work, with GreenFiber cellulose or Owens Corning fiberglass dense-packed into open attics or wall cavities. For the post-fire homes with original R-19 fiberglass, we often remove the inadequate layer first, seal air leaks, then blow to proper depth. The material choice depends on your assembly and moisture risk. Blown-In Insulation in Camp Swift breaks down costs and applications.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterCrawl Space Encapsulation & Vapor Barrier in Camp Swift
The Lost Pines humidity around Camp Swift collects in crawl spaces differently than in open Hill Country terrain, making vapor barrier management and crawl space encapsulation critical for homes built during the 2012-2015 rebuild wave and for older ranch properties with vented dirt-floor crawl spaces. Many post-fire homes got minimal ground cover or thin 6-mil poly that degrades quickly in our soil conditions, leaving floor systems exposed to seasonal moisture spikes. Crawl Space Encapsulation & Vapor Barrier covers our full service line for this work.
Crawl Space Encapsulation
Signs you need it
Your floors feel cold in winter, you smell mustiness from below, or you find fiberglass batts sagging and darkened in the crawl space.
What it costs in Camp Swift
Full crawl space encapsulation in Camp Swift typically runs $4,200-$6,500 for homes under 2,500 square feet, with larger post-fire rebuilds or complex perimeter shapes toward the upper end.
How we do it
We install a reinforced vapor barrier across the entire ground surface, seal it to foundation walls, tape all seams, then close vents and add a dehumidifier if moisture readings warrant it, with before-and-after humidity logging.
Crawl Space Vapor Barrier
Signs you need it
You have bare dirt or thin, torn polyethylene in your crawl space, or your rim joists show surface mold or wood discoloration.
What it costs in Camp Swift
Vapor barrier-only installation in Camp Swift runs $2,800-$4,500 depending on crawl space square footage and whether we need to remove degraded existing material first.
How we do it
We remove old poly, grade the ground surface, lay 12-mil reinforced barrier with sealed overlaps, and terminate it six inches up the foundation wall, documenting the full perimeter with photos.
What Crawl Space Encapsulation & Vapor Barrier Costs in Camp Swift
| Item | Typical range in Camp Swift |
|---|---|
| Vapor barrier installation (ground only) | $2,800 - $4,500 |
| Full encapsulation with sealed walls | $4,200 - $6,500 |
| Encapsulation with dehumidifier add-on | $5,500 - $7,800 |
Can crawl space encapsulation fix my musty smell?
Yes, in most Camp Swift cases the musty smell comes from ground moisture evaporating into the crawl space air and migrating upward through the floor; sealing the ground and controlling humidity eliminates the source. Call (254) 970-2136 for a free inspection and written price.
How long does encapsulation take?
Most Camp Swift crawl space encapsulations finish in two to three days, with day one for prep and old material removal, day two for barrier installation and sealing, and day three for dehumidifier setup if included. We text arrival windows and named technician assignments under Haven Standard scheduling.
Radiant Barrier Installation in Camp Swift
Camp Swift attics regularly exceed 140°F surface temperatures in July and August, and the post-fire rebuilds with R-19 or less fiberglass offer almost no resistance to that radiant heat transfer downward into living space. Radiant barrier installation addresses this directly by reflecting infrared radiation rather than absorbing it, reducing the cooling load that your HVAC system fights against for five months of the year. Radiant Barrier Installation details our full approach.
Attic Radiant Barrier
Signs you need it
Your upstairs rooms stay hot after sunset, your AC runs continuously on summer afternoons, or your ductwork in the attic feels hot to the touch.
What it costs in Camp Swift
Attic radiant barrier installation in Camp Swift runs $1,800-$3,200 for most homes, with larger post-fire rebuilds and complex attic shapes toward $3,800.
How we do it
We staple perforated radiant barrier foil across the underside of roof rafters, maintaining ventilation channels and avoiding contact with roofing nails, then photograph the full installation for your record.
Radiant Barrier Roof Deck
Signs you need it
You’re re-roofing a Camp Swift home or your roof deck is exposed during repairs, presenting access that won’t exist again for decades.
What it costs in Camp Swift
Radiant barrier roof deck application in Camp Swift runs $2,400-$4,500 when done as a standalone job, or $1,200-$2,200 when combined with re-roofing labor.
How we do it
We apply radiant barrier sheathing or foil directly to the roof deck before new shingles go down, creating a permanent reflective layer that doesn’t sag or tear like stapled foil can.
What Radiant Barrier Installation Costs in Camp Swift
| Item | Typical range in Camp Swift |
|---|---|
| Attic radiant barrier (stapled foil) | $1,800 - $3,800 |
| Radiant barrier roof deck (standalone) | $2,400 - $4,500 |
| Radiant barrier with re-roofing | $1,200 - $2,200 |
Does radiant barrier work with my existing insulation?
Yes, radiant barrier complements rather than replaces insulation; we install it after air sealing and before adding blown insulation, so both systems work together. Call (254) 970-2136 for a free assessment of your attic assembly.
Will radiant barrier make my attic colder in winter?
No, the reflective surface works bidirectionally, and in Camp Swift’s mild winters the dominant heat flow is still outward from your living space, so the barrier helps retain warmth rather than block it.
Insulation Removal & Replacement in Camp Swift
The post-fire rebuilds around Camp Swift contain a specific problem: blown fiberglass installed at R-19 or less by volume builders working compressed insurance timelines, now compacted and underperforming after a decade of Texas heat cycling. Insulation removal and replacement corrects this, pulling out the inadequate material so we can seal air leaks and install proper depth. Insulation Removal & Replacement covers our full process.
Contaminated Insulation Removal
Signs you need it
You see rodent droppings, urine staining, or mold growth in your attic insulation, or you smell ammonia or mustiness coming from ceiling penetrations.
What it costs in Camp Swift
Contaminated insulation removal in Camp Swift runs $2,200-$4,800 depending on square footage, contamination type, and whether hazmat protocols apply for older materials.
How we do it
We set up negative air pressure containment, remove bagged insulation through sealed chutes, HEPA-vacuum all surfaces, and apply antimicrobial treatment before any new material goes in.
Insulation Replacement
Signs you need it
Your attic insulation measures below R-30, shows uneven depth or settled valleys, or was installed by the original post-fire builder known for underspecifying R-value.
What it costs in Camp Swift
Insulation replacement in Camp Swift runs $3,500-$6,800 for most homes, with removal of existing material adding $1,500-$3,200 to the total.
How we do it
We remove existing material, photograph the exposed deck, seal all top plates and penetrations with foam and caulk, then blow new cellulose or fiberglass to R-38 or higher with depth markers visible.
What Insulation Removal & Replacement Costs in Camp Swift
| Item | Typical range in Camp Swift |
|---|---|
| Contaminated insulation removal only | $2,200 - $4,800 |
| Standard removal + replacement to R-38 | $3,500 - $6,800 |
| Removal with full air sealing package | $5,000 - $9,200 |
Can you remove insulation with asbestos?
We do not handle asbestos-containing materials; if we suspect vermiculite or pre-1990 batt insulation, we pause work and refer you to a licensed abatement contractor for testing and removal. Call (254) 970-2136 for a free inspection if you’re unsure what you have.
How do I know if my post-fire home has underspecified insulation?
We measure depth with a ruled probe and check for the compressed, uneven settling common in the 2012-2014 volume-builder installations; if your attic shows R-19 or less in a home built during that window, you likely have the shortcut pattern.
Attic Air Sealing in Camp Swift
The post-fire rebuilds in Camp Swift were framed quickly and insulated faster, with top plates, can lights, and duct boots left unsealed while blown fiberglass was dumped over them. Attic air sealing finds and closes these leaks before any insulation goes in, because we don’t blow material over a leaky floor. Attic Air Sealing explains our full methodology.
Top Plate & Penetration Sealing
Signs you need it
You feel drafts from ceiling fixtures, your blower-door test shows excessive infiltration, or you see dirty insulation stripes indicating air movement through the attic floor.
What it costs in Camp Swift
Top plate and penetration sealing in Camp Swift runs $1,800-$3,500 for most homes, with larger post-fire rebuilds and complex rooflines toward $4,200.
How we do it
We pull back existing insulation, foam-seal every top plate joint, wire penetration, and plumbing stack, then replace insulation and mark sealed locations on your photo record.
Can Light & Duct Boot Sealing
Signs you need it
Your can lights flicker in wind, you feel conditioned air escaping around ceiling registers, or thermal imaging shows hot spots around fixtures in summer.
What it costs in Camp Swift
Can light and duct boot sealing in Camp Swift runs $900-$2,400 depending on fixture count and whether we install fire-rated covers or sealed boots.
How we do it
We install pre-formed fire-rated covers over IC and non-IC cans, seal them to drywall with caulk, then mastic-seal duct boots and replace any crushed flex runs we find.
What Attic Air Sealing Costs in Camp Swift
| Item | Typical range in Camp Swift |
|---|---|
| Top plate & penetration sealing | $1,800 - $4,200 |
| Can light & duct boot sealing | $900 - $2,400 |
| Full attic air sealing package | $2,800 - $5,500 |
Do you seal before or after adding insulation?
We always seal first, then insulate; blowing insulation over unsealed leaks buries them and makes future access difficult, which is why Haven Standard Clause 1 requires sealed-before-insulated sequencing. Call (254) 970-2136 for a written scope and price.
What does a blower-door test tell me?
A blower-door test, a pressurization reading that shows in one number how much air your building envelope is losing, gives you before-and-after proof of sealing effectiveness; we publish these numbers on every applicable Camp Swift job.
Wall Insulation in Camp Swift
Pre-2011 Camp Swift homes often have empty stud cavities or thin fiberglass batts that settled long ago, while the post-fire rebuilds used whatever the volume builder’s crew had on the truck that week. Wall insulation addresses both cases without full interior demolition, using injection or drill-and-fill methods that work through small exterior or interior access points. Wall Insulation details our complete service.
Injection Foam Wall Insulation
Signs you need it
Your exterior walls feel hot to the touch in summer, you have no insulation in older 2×4 framing, or your energy bills spike despite adequate attic insulation.
What it costs in Camp Swift
Injection foam wall insulation in Camp Swift runs $3,500-$6,200 for a typical 1,500-2,500 square foot home, with open-cell Icynene or closed-cell options affecting material cost.
How we do it
We drill 5/8-inch holes through exterior siding or interior drywall at stud-bay spacing, inject foam under controlled pressure, then plug and match finish; exterior work avoids interior disruption.
Drill & Fill Wall Insulation
Signs you need it
You have settled or degraded batt insulation in walls, or you’re remodeling and have temporary access to stud bays before drywall goes back up.
What it costs in Camp Swift
Drill and fill wall insulation in Camp Swift runs $2,800-$5,400 for dense-packed cellulose or fiberglass, with GreenFiber cellulose costing slightly less than Owens Corning fiberglass.
How we do it
We drill access holes, dense-pack cellulose or fiberglass to 3.5 pounds per cubic foot using a fill tube that reaches the top plate, then seal holes and verify density with thermal imaging.
What Wall Insulation Costs in Camp Swift
| Item | Typical range in Camp Swift |
|---|---|
| Injection foam (open-cell) | $3,500 - $6,200 |
| Drill & fill dense-pack cellulose | $2,800 - $5,400 |
| Drill & fill fiberglass | $3,200 - $5,800 |
Will injection foam damage my walls?
We control injection pressure to prevent drywall bowing and use slow-rise formulas in existing construction; in ten years and 9,000+ homes, we’ve had zero pressure-damage claims. Call (254) 970-2136 for a free assessment of your wall assembly.
Can you insulate walls without removing drywall?
Yes, exterior drill-and-fill or injection methods require only small holes that we plug and match to siding or trim, making it practical for finished Camp Swift homes.
Attic Cleaning & Rodent Proofing in Camp Swift
The Lost Pines ecosystem around Camp Swift supports active wildlife populations, and attics with inadequate sealing from the 2012-2015 rebuild wave provide easy entry through soffit gaps, roof vents, and uncapped penetrations. Attic cleaning and rodent proofing removes contamination, seals entry points, and restores the attic to a condition where new insulation can perform as specified. Attic Cleaning & Rodent Proofing covers our full protocol.
Attic Sanitizing & Decontamination
Signs you need it
You find rodent droppings, nesting material, or urine stains in your attic insulation, or you smell organic decay from above your ceiling.
What it costs in Camp Swift
Attic sanitizing and decontamination in Camp Swift runs $1,800-$3,800 depending on contamination extent, attic square footage, and whether insulation removal precedes treatment.
How we do it
We remove contaminated insulation under negative pressure, HEPA-vacuum all surfaces, apply enzyme-based sanitizer to break down organic matter, and run an ozone treatment before any new material is installed.
Rodent Proofing & Exclusion
Signs you need it
You hear scratching at night, find droppings near attic hatches, or see gnaw marks on fascia boards or roof vents.
What it costs in Camp Swift
Rodent proofing and exclusion in Camp Swift runs $1,200-$2,800 for most homes, with complex rooflines and multiple entry points toward $3,500.
How we do it
We inspect the full roof perimeter, seal all entry points larger than 1/4 inch with steel mesh and foam, install vent guards, and provide a written exclusion map with photo documentation.
What Attic Cleaning & Rodent Proofing Costs in Camp Swift
| Item | Typical range in Camp Swift |
|---|---|
| Attic sanitizing & decontamination | $1,800 - $3,800 |
| Rodent proofing & exclusion | $1,200 - $3,500 |
| Full attic restoration (cleaning + proofing + insulation) | $4,500 - $9,200 |
How do I know if rodents are in my attic?
Nocturnal scratching, droppings near the attic hatch, and compressed insulation trails are the three most common indicators; we confirm entry points with a roofline inspection. Call (254) 970-2136 for a free inspection and written scope.
Will rodents come back after you seal?
Our exclusion work carries the 365-Day Done Right Promise; if rodents re-enter through any location we sealed, we return and correct it at no charge, backed by your written warranty.
Home Energy Audit in Camp Swift
A home energy audit in Camp Swift gives you documented evidence of where your specific house loses conditioned air and gains unwanted heat, critical information when you’re deciding between insulation repair, full replacement, or envelope sealing. For the post-fire rebuilds with unknown installation quality and the pre-2011 homes with decades of modifications, the audit replaces guesswork with measured data. Home Energy Audit explains our full audit protocol.
Blower Door Test
Signs you need it
Your energy bills seem high for your home size, you feel drafts you can’t locate, or you’re planning insulation work and want before-and-after proof of improvement.
What it costs in Camp Swift
A standalone blower-door test in Camp Swift runs $350-$550, or it’s included at no additional charge when bundled with our air sealing or insulation replacement services.
How we do it
We install a calibrated fan in an exterior door, depressurize the house to 50 Pascals, measure CFM50 airflow, then use smoke pencils and thermal imaging to locate leak paths while the house is under test.
Thermal Imaging Inspection
Signs you need it
You have uneven room temperatures, suspect missing insulation in walls or ceilings, or want visual proof of insulation gaps before committing to work.
What it costs in Camp Swift
Thermal imaging inspection in Camp Swift runs $250-$450 as a standalone service, or $150-$250 when added to a blower-door test or insulation assessment.
How we do it
We scan the full building envelope with a FLIR camera during normal heating or cooling operation, capturing images that show temperature differentials indicating missing insulation, air leaks, or moisture intrusion.
What Home Energy Audit Costs in Camp Swift
| Item | Typical range in Camp Swift |
|---|---|
| Blower-door test (standalone) | $350 - $550 |
| Thermal imaging inspection | $250 - $450 |
| Full home energy audit (both tests + report) | $450 - $750 |
What do I get after the audit?
You receive a written report with blower-door numbers, thermal images with annotations, a prioritized scope of recommended work, and a flat-price quote for any services we provide; no work starts without your written approval. Call (254) 970-2136 to schedule.
Can I use audit results with another contractor?
Yes, the report and images are yours to keep; we also offer a Free Second Opinion on any written estimate you bring us, reading competitor quotes with you line by line.
Brands We Service in Camp Swift
We source insulation and air sealing materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, with no proprietary product lock-in that limits your options. Our Austin office stocks CertainTeed and Icynene products for same-week Camp Swift jobs, and we order other brands with three- to five-day lead time when your assembly specifies them. See our brands for full specifications.
Pricing for Insulation in Camp Swift, TX
| Service | Typical range in Camp Swift |
|---|---|
| Crawl space vapor barrier | $2,800 - $4,500 |
| Full crawl space encapsulation | $4,200 - $6,500 |
| Attic radiant barrier (stapled foil) | $1,800 - $3,800 |
| Contaminated insulation removal | $2,200 - $4,800 |
| Insulation removal + replacement to R-38 | $3,500 - $6,800 |
| Full attic air sealing package | $2,800 - $5,500 |
| Injection foam wall insulation | $3,500 - $6,200 |
| Drill & fill dense-pack cellulose | $2,800 - $5,400 |
| Rodent proofing & exclusion | $1,200 - $3,500 |
| Attic sanitizing & decontamination | $1,800 - $3,800 |
| Full home energy audit | $450 - $750 |
Prices in Camp Swift push toward the higher end when we encounter post-fire rebuilds with complex rooflines, degraded or underspecified existing material that requires removal, or active moisture issues needing correction before insulation can perform. Every job begins with a written price before any work starts, with no change orders unless you add scope, per Haven Standard Clause 1.
Neighborhoods We Serve in Camp Swift
Civilian housing near Camp Swift clusters in the unincorporated Lost Pines communities surrounding the National Guard reservation, with dispatch and scheduling coordinated from our Austin office. Most Camp Swift-area appointments book within two business days, with emergency calls answered by a live person 24/7.
- Lost Pines
- Bastrop Lake Estates
- Colovista
- Tahitian Village
- Circle D
Service Area - Cities Near Camp Swift
We serve Camp Swift from our Austin coordination office, with crews working throughout Bastrop County and into neighboring communities. Homeowners in Georgetown, TX, Round Rock, TX, Brushy Creek, TX, and Leander, TX can schedule the same building-envelope services with the same written-price guarantee and documented completion record.
Serving Camp Swift, TX - Our Local Coverage Area
We’re based in the Camp Swift area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Camp Swift
Most Camp Swift appointments schedule within two business days for non-emergency work, and our live answering service takes calls 24/7 for urgent issues like failed HVAC related to insulation loss or active water intrusion in crawl spaces. Dispatch routes from our Austin office with named technicians and text notifications when they’re en route.
Bastrop County generally does not require permits for attic insulation replacement or retrofit work in unincorporated areas like Camp Swift, though new construction and spray foam applications sometimes trigger building department review; we verify requirements before work starts and include any permit costs in your written price.
The 2012-2015 reconstruction wave used volume builders who commonly installed R-19 blown fiberglass in attics requiring R-38 or higher, leaving a cohort of structurally new but thermally underperforming homes unique to this corridor; we identify this pattern with depth probes and thermal imaging during our initial assessment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Camp Swift Customers Say
"They photographed rodent damage in the old insulation that we had no idea about, and priced the exclusion work separately so we could decide."
- Harriet N."Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."
- Ainsley P."Fixed price, clean work, and they hauled the old material away as agreed."
- Todd M.