Owens Corning Insulation Removal & Replacement in Georgetown: What to Know First
We provide independent Owens Corning insulation removal and replacement in Georgetown, typically completing attic jobs in one to two days with a written price locked before any work starts. Most Owens Corning insulation removals in Georgetown run between $1,800 and $4,200 depending on contamination level, attic square footage, and whether the original install was part of a new-build spec job or a retrofit. We are not affiliated with or authorized by Owens Corning - we are an independent service provider - which means we source OEM and quality aftermarket materials based on what your specific attic needs, not a factory product mandate.
This page is for Georgetown homeowners who found Owens Corning insulation in their attic and need it out: whether it’s compressed below labeled R-value, contaminated by rodent activity common near the San Gabriel River corridor, or part of a 2005-2015 new-build install that settled faster than spec in our 100°F-plus summer attics. Call (254) 970-2136 for a free estimate with a written price before we leave.
How Owens Corning Products Fail - and How We Fix Them
- Owens Corning AttiCat PINK Blown-In Wool settling in Sun City Georgetown homes. The fiberglass loose-fill we pull out of 2010-2018 Sun City builds is often measuring 20-30% below labeled R-value because vibration from nearby Ronald Reagan Boulevard traffic and thermal cycling in 140°F attics accelerates compression. We remove it with commercial vacuums, seal every top plate and can-light penetration with foam, then reinstall to true depth with a density check every 100 square feet.
- Owens Corning EcoTouch PINK Fiberglas Batt moisture retention in river-corridor homes. Homes backing up to the San Gabriel River or in low-lying Georgetown pockets near Berry Creek get humidity spikes that fiberglass batts don’t shed well. We’ve pulled EcoTouch batts that weighed double their dry weight, with mold on the paper facing. We remove, HEPA-vac the deck, apply antimicrobial where needed, then switch to blown-in or spray foam depending on the moisture source we identify.
- Owens Corning ProCat loose-fill installed over unsealed attics in 2015-2020 builds. Production builders in Georgetown’s Teravista and Rancho Sienna phases often blew ProCat directly over leaky top plates and bath-fan housings. The insulation works; the air leaks just work harder. We vacuum out the compromised layer, foam-seal every penetration, then reinstall - this time with a blower-door target, not just a bag count.
- Owens Corning FOAMULAR rigid board degradation in crawl space applications. FOAMULAR XPS boards we find in Georgetown crawl spaces after termite treatment or plumbing repairs often have scored, broken, or water-damaged sections where the vapor barrier failed. We remove the damaged boards, assess the crawl for ongoing moisture, then replace with matched thickness or upgrade to closed-cell spray foam if the budget allows and the moisture source is controlled.
- Owens Corning QuietZone batt compression in bonus-room kneewalls. The acoustic batts installed in 2000s-era Georgetown two-story kneewalls get compressed by homeowners storing holiday decorations against them, dropping effective R-value to half of label. We remove the compressed material, air-seal the kneewall sheathing with canned foam and rigid backing, then reinstall with proper retention netting so the R-value stays where we put it.
Our Owens Corning Insulation Removal & Replacement Process

- 1
Call and schedule. A live person answers 24/7. We book a site visit, usually within 48 hours for Georgetown addresses.
- 2
Attic inspection with thermal imaging and blower-door baseline. We document what Owens Corning product is in place, its condition, and the air-leakage rate in CFM50 - a pressurization reading that shows, in one number, how much conditioned air your building envelope is losing.
- 3
Written price and scope before any work starts. Under Haven Standard Clause 1: flat price, written scope, written warranty. No exceptions. We also offer a Free Second Opinion on any competing written estimate.
- 4
Removal and deck preparation. Commercial insulation vacuum, HEPA filtration, rodent dropping remediation if present, foam-sealing of all penetrations. Wes Okafor’s rule: seal the holes first. Then we talk about R-value.
- 5
Replacement with specified material. Owens Corning, Johns Manville, Knauf, Rockwool, or other sourced material - no proprietary lock-in. Density-checked, depth-verified, thermal-imaged before we close.
- 6
Post-job documentation. Blower-door retest, measured R-values, duct-leakage numbers from the actual test, and a Documented Photo Record delivered to you. The 365-Day Done Right Promise applies from day one.
Before
AfterWhat Owens Corning Insulation Removal & Replacement Costs in Georgetown
| Scenario | Typical Range |
|---|---|
| Standard attic removal and replacement, 1,200-1,800 sq ft, no contamination | $1,800 - $2,800 |
| Attic with rodent contamination, sanitization required | $2,400 - $3,600 |
| Deep removal (multiple layers, pre-1990s material suspected) | $3,000 - $4,500 |
| Crawl space FOAMULAR board removal and replacement | $2,200 - $3,800 |
| Full envelope: attic + crawl + air sealing with blower-door targets | $4,500 - $7,500 |
What moves the price: square footage, accessibility (truss spacing, deck condition), contamination level, and whether we’re matching existing R-value or upgrading. We don’t quote over the phone for removal jobs - we need to see what’s actually in your attic. Call (254) 970-2136 for a free estimate with a written price before any work starts.
Why Georgetown Homeowners Call Topside Attic Insulation Georgetown for Owens Corning Work

We’ve pulled Owens Corning products from Georgetown attics since 2016 - from the early AttiCat installs in Berry Creek to the ProCat spec jobs in Santa Rita Ranch. Our crews know the difference between a batt that can be repositioned and one that’s landfill-bound. Every job gets a written price first, a Documented Photo Record at close, and before-and-after blower-door numbers when air sealing is part of the scope. The 365-Day Done Right Promise is in writing, not a handshake.
We also service Reflectix and other brands, so if your attic has mixed materials from multiple contractors over the years, we don’t need to call in a second trade. Background-checked, uniformed technicians. Calls answered by a live person, 24/7. No voicemail loops.
FAQs
Owens Corning product warranties cover manufacturing defects, not installation or removal by independent contractors. If your insulation was installed by a builder or previous contractor, the product warranty remains intact as long as replacement material meets OEM specs - which we verify by lot number when sourcing. Call (254) 970-2136 and we’ll review your specific product line and warranty status during the free estimate.
We can source current Owens Corning lines including AttiCat, ProCat, and EcoTouch through our supplier network. We also install Johns Manville, Knauf, Rockwool, and others. We recommend based on your attic’s moisture conditions, access constraints, and performance target - not brand loyalty. The written scope names the exact product and R-value before work starts.
If the material is dry, uncompressed, and free of rodent activity, a top-off may work. We verify with depth measurements, thermal imaging for gaps, and a blower-door test for air leakage. In Georgetown’s river-corridor homes and 2005-2015 builds with known settling issues, we more often find removal is the honest recommendation. The inspection is free; the written price comes before any work starts.
Most residential attic jobs finish in one to two days. Crawl space or full-envelope work runs two to three. We schedule within 48 hours of your call for estimates, and typical lead time for work is one to two weeks depending on season. Call (254) 970-2136 for current availability - a live person answers 24/7.
Patchwork around contaminated or compressed insulation usually costs more long-term because you’re paying for selective removal, disposal, and careful integration with compromised material - then doing it again when the old layer fails. For most Georgetown attics we inspect, full removal and replacement with proper air sealing delivers lower lifecycle cost and a documented performance number you can verify. We offer a Free Second Opinion on any written estimate if you want us to compare approaches.
Written by Wes Okafor, Owner, Topside Attic Insulation Georgetown at Topside Attic Insulation Georgetown, serving Georgetown and nearby areas.