Owens Corning Attic Insulation Nationwide

Owens Corning Attic Insulation: The Georgetown Owner’s Guide

We stock and install Owens Corning-compatible blown-in and batt attic insulation in Georgetown, with most attic insulation jobs in a home this size running between $1,800 and $4,200 installed. Same-day installation is available when we have your R-value and square footage confirmed by phone. Homeowners usually discover the problem when their upstairs bedrooms won’t cool below 78°F in July, or when they find compressed, discolored batts in the attic that have slipped off the top plates.

Call (254) 970-2136

Which Owens Corning Models This Applies To

Owens Corning produces several attic insulation lines that appear in Georgetown homes built from 1995 onward, and identifying the right match matters for both thermal performance and warranty coverage. The pink fiberglass batts you’ll see are typically from the EcoTouch PINK FIBERGLAS series, available in R-13 through R-38 rated for 2×4 and 2×6 framing. Blown-in systems are usually PROPINK L77 loose-fill, blown to depth charts printed on the attic rafters by original builders in Sun City Georgetown and the Teravista corridor.

To identify what you have, check for the Owens Corning logo printed on the Kraft paper facing of batts, or look for a small specification tag stapled to a roof truss in blown-in attics. The critical compatibility gotcha in Central Texas: L77 loose-fill requires a minimum settled depth of 14 inches to achieve R-38, but many Georgetown installers stopped at 10 inches in the 2000s building boom. We measure actual depth with a ruled probe, not a visual guess, because compressed or under-blown insulation reads a full R-value tier lower than labeled.

Topside Attic Insulation Georgetown is an independent service provider, not affiliated with Owens Corning. We source Owens Corning materials through authorized distribution, but we also stock Johns Manville, Knauf, and Rockwool equivalents when the application calls for different density or moisture handling. The OEM-versus-aftermarket decision here is straightforward: Owens Corning batts and loose-fill are commodity products with tight manufacturing tolerances, so we match by R-value, density, and facing type rather than chasing brand loyalty.

Signs Your Owens Corning Attic Insulation Is Failing

• Uneven temperatures room-to-room. The upstairs master runs 8-12 degrees hotter than the downstairs thermostat setting. This usually means batt insulation has slipped off the top plates or blown-in has settled unevenly, creating thermal bypasses where conditioned air escapes into the attic.
• Discolored or darkened insulation. Pink batts turning gray or black indicate airborne dust and moisture are moving through the material, not just settling on it. The insulation is filtering your indoor air, which means your air barrier has failed first.
• Ice dams or heavy frost on nails in winter. Warm, moist air hitting cold roof decking condenses and freezes. In Georgetown’s occasional hard freezes, this shows up as frost on nail points poking through the roof sheathing. The insulation isn’t the problem; the air leakage through it is.
• Energy bills climbing year-over-year with no rate change. When we blower-door test homes in the Berry Creek and Cimarron Hills areas, we regularly see 3,800-5,200 CFM50 on houses with intact-looking Owens Corning batts. The insulation is present but bypassed by air moving around and through it.
• Compressed or matted batts below 3.5 inches thick. Original R-13 batts compressed by storage boards, ductwork, or rodent activity drop to R-8 or lower effective value. We document this with thickness measurements and thermal images before quoting replacement.

Before

After

Replacement Cost & What’s Included

Most Owens Corning attic insulation replacements in Georgetown run $1,800-$4,200 for a typical 1,800-2,800 square foot home, with the range driven by three factors: whether we remove existing material or supplement over it, the R-value you’re targeting, and whether air sealing is required first. We do not quote insulation without assessing the air barrier condition.

Our installed price includes material measured by the bag or square foot, labor, cleanup, and disposal of removed insulation. We provide a Written Price Before Any Work Starts under Haven Standard Clause 1, with the scope, warranty, and flat price delivered before anyone enters the attic. Every job closes with a Documented Photo Record. On applicable jobs, we provide before-and-after blower-door numbers so you can verify the air-sealing result in a single figure.

Materials carry manufacturer warranty; our 365-Day Done Right Promise covers installation workmanship. We also source Reflectix radiant barrier products when roof deck temperatures in Georgetown attics exceed 140°F and the homeowner wants to address radiant heat gain separately from conductive loss.

DIY or Call Us?

There’s safe checking, and then there’s work that belongs in documented hands. You can verify your insulation type and measure settled depth with a ruler and flashlight from the attic hatch. Look for the Owens Corning specification tag, photograph any discolored areas, and note whether your soffit vents are blocked by insulation.

What you should not do: remove old insulation without respiratory protection and proper containment, disturb vermiculite or unknown vintage material that may contain asbestos, or blow new loose-fill over an unsealed attic floor. The compressed-blown-in look that seems adequate often hides top plates and can lights leaking 300 CFM50 or more. Wes Okafor’s rule on every Georgetown job: seal the holes first. Then we talk about R-value. Call (254) 970-2136 for a free estimate and we’ll show you what the thermal camera sees.

FAQs