Icynene Insulation Removal & Replacement Nationwide

Icynene Insulation Removal & Replacement in Georgetown: What to Know First

We provide independent Icynene insulation removal & replacement in Georgetown, typically completing most jobs in one to two days with a written price delivered before any work starts. Most Icynene attic removals in a Georgetown home this size run between $2,800 and $5,400 for full extraction and replacement, depending on square footage, contamination level, and whether the foam is open-cell (Icynene Classic Max, LD-C-50) or closed-cell (Icynene ProSeal, MD-C-200). This page is for homeowners who found Icynene spray foam in their attic that is off-gassing, cracking, water-stained, or simply the wrong product for our Central Texas climate, and who want the replacement done with documented air-sealing performance, not just a new layer blown over the old problem. Call (254) 970-2136 for a free estimate with a written scope.

Call (254) 970-2136

How Icynene Products Fail - and How We Fix Them

• Icynene Classic Max (open-cell) - moisture trapping in Georgetown’s humid shoulder seasons. Open-cell foam is vapor-permeable, which means it allows moisture to pass through - but in Georgetown, where spring humidity spikes before the AC runs hard and fall dew points linger, we’ve seen Classic Max hold moisture against roof sheathing when the attic isn’t properly vented or the foam thickness exceeds the drying potential. The result is dark staining, wood decay, and in three attics we’ve worked near the San Gabriel River corridor, full sheathing replacement. We remove the saturated foam with specialized scraping tools and thermal-assisted cutting, then replace with a closed-cell system or a hybrid approach that includes proper ridge and soffit ventilation calculations.
• Icynene ProSeal (closed-cell) - thermal drift and shrinkage at the 2-inch lift boundary. ProSeal is a medium-density closed-cell foam rated at R-6 per inch, but when installers rush the lift schedule - applying the second 2-inch pass before the first has fully reacted - the foam can shrink at the interface, creating gaps that show up on our FLIR cameras as cold stripes in January. In a 2019 Sun City Georgetown build we inspected, this shrinkage reduced the effective R-value by roughly 18% despite the label claim. We cut out the delaminated sections, verify the substrate moisture content with a pin meter, and reapply in proper lifts with documented cure times.
• Icynene LD-C-50 (low-density open-cell) - overspray onto HVAC flex duct and recessed can housings. LD-C-50 expands aggressively, and inexperienced installers often bury mechanical systems that need to remain accessible. We’ve found flex duct compressed to half its diameter and can lights packed so tight the thermal cutoff trips. Our removal process isolates these systems first, extracts the surrounding foam with controlled cutting, and replaces with a material selected for the actual application - not whatever was on the truck that morning.
• Icynene MD-C-200 (medium-density) - chemical odor persistence from off-ratio mixing. When the A-side and B-side aren’t delivered at the correct temperature and pressure, MD-C-200 can emit a sharp, sweet odor that lingers for months. We’ve had Georgetown homeowners describe it as “new car smell that won’t quit.” The fix isn’t covering it with paint or another layer - it’s full removal down to substrate, air quality testing with a photoionization detector, and reinstallation with real-time ratio monitoring that we document in the job record.
• All Icynene lines - inadequate air sealing beneath the foam. This isn’t a product failure; it’s an installation failure we see constantly. A crew blows Icynene over a leaky attic floor, and the homeowner gets an R-value label but no actual performance because conditioned air is still escaping through top plates, wire penetrations, and chimney chases. We won’t touch a replacement job without first running a blower-door test - a pressurization reading that shows, in one number, how much air the building envelope is losing - then sealing every leak before the new insulation goes in. Seal the holes first. Then we talk about R-value.

Our Icynene Insulation Removal & Replacement Process

1. 1
   Call and scheduling. A live person answers, 24/7. We book a site visit, and you get a text when Wes or a named technician is en route - Haven Standard: Arrive on schedule.
2. 2
   Blower-door test and thermal imaging. We measure pre-job air leakage and shoot FLIR video to map where the Icynene is failing, whether it’s moisture-loaded, delaminated, or simply the wrong density for the application.
3. 3
   Written price and scope. Before any work starts, you receive a flat price, written scope, and written warranty - Haven Standard Clause 1. No exceptions. This includes our material recommendation: in some cases, we specify replacement Icynene from our supplier network; in others, we recommend Johns Manville, Knauf, or Rockwool products when they better serve the assembly.
4. 4
   Controlled removal and substrate prep. We extract the failed foam with thermal cutting, mechanical scraping, and HEPA-contained vacuum systems. The deck gets inspected for moisture damage, and any compromised sheathing is flagged with photos before replacement insulation begins.
5. 5
   Air sealing and replacement installation. Every penetration is foam-sealed, top plates are gasketed or sealed with compatible caulk, and the new insulation is installed to the specified R-value with documented depth or thickness checks.
6. 6
   Post-test and documentation. We run a second blower-door test, deliver before-and-after readings, and provide a Documented Photo Record showing pre-condition, mid-removal, and completed assembly. You leave with measured numbers, not a handshake.

Before

After

What Icynene Insulation Removal & Replacement Costs in Georgetown

Most Icynene removal and replacement jobs in Georgetown fall into these ranges:

What moves the price: attic square footage, foam density and thickness, accessibility (steep pitches and tight scuttles add labor hours), contamination requiring hazmat protocol, and whether the job includes duct sealing or ventilation correction. We also service Reflectix radiant barrier systems when they’re part of the same assembly failure. Every estimate is free, written, and binding - no work starts without your signature on a flat price. Call (254) 970-2136 for an exact quote.

Why Georgetown Homeowners Call Topside Attic Insulation Georgetown for Icynene Work

We’ve removed and replaced Icynene in Georgetown attics since 2016, from the historic homes near Southwestern University to new builds in Santa Rita Ranch where the original installer is already out of business. As an independent Icynene service provider, we’re not bound to any single manufacturer’s product line - we source from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, and we specify what actually fits the assembly.

Every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right, backed by the written scope and warranty you received before anyone lifted a tool. Our technicians are background-checked and uniformed, and Wes Okafor reviews every blower-door report before it goes to the homeowner. We’ve sealed and insulated over 9,000 homes, and we publish the before-and-after numbers so you can verify the result yourself.

FAQs