A Topside company - serving Georgetown, TX

Owens Corning Home Energy Audit Nationwide

Owens Corning Home Energy Audit in Georgetown: What to Know First

We provide independent Owens Corning home energy audit in Georgetown, typically scheduling within 48 hours and completing the full diagnostic same-day. Most audits run between $280 and $550 depending on home size and test scope, and you’ll get a written price before we start - no exceptions. This page is for Georgetown homeowners who own Owens Corning insulation products and need a proper building-envelope assessment that tells you what’s actually failing, not a sales pitch dressed up as science. Call (254) 970-2136 to schedule or text us if you prefer.

Call (254) 970-2136

How Owens Corning Products Fail - and How We Fix Them

  • PINK Next Gen Fiberglass batts in Sun City Georgetown homes lose contact with top plates when attic temperatures cycle past 130°F through July and August. The paper facing detaches from the stud bay, creating a convection loop that reads as a 15-20% spike on the thermal imager. We pull the displaced batts, foam-seal every top plate and electrical penetration, then reinstall with proper friction fit and strapping.
  • AttiCat blown-in systems in 2018-2022 builds near the San Gabriel River corridor settle unevenly because the original installers skipped air sealing and the loose-fill migrated with every pressure change. Our blower-door test - a pressurization reading that shows, in one number, how much air your building envelope is losing - typically finds 3,800-5,200 CFM50 in these homes. We remove the settled material, seal the deck, and redeploy with documented depth markers.
  • FOAMULAR NGX rigid board in crawl spaces absorbs perimeter moisture when the vapor barrier below it was taped at seams but never sealed to the foundation wall. The board edges delaminate and the R-value drops measurably. We photograph the degradation, pull the compromised sections, and reinstall with proper perimeter sealing and a continuous 6-mil vapor barrier tied to the wall.
  • Ecotouch batts in pre-2020 Georgetown homes compress around can lights where the original installer left non-IC fixtures unprotected. The compressed fiberglass loses effective R-value and the hot spot creates a thermal bypass we catch at 30 feet on the FLIR. We install fire-rated covers, air-seal the housing, and replace with properly cut batts or dense-pack where the cavity allows.
  • ProPink LooseFill in homes near I-35 shows rodent disturbance patterns - the gray-pink blend is distinctive when torn and scattered. We document the damage with photos, remove contaminated material under contained conditions, seal entry points with steel and foam, and reinstall fresh product only after the attic is cleaned and proofed.

Our Owens Corning Home Energy Audit Process

Professional technician measuring attic insulation depth with a ruler
Our Owens Corning Home Energy Audit Process
  1. 1
    Schedule and scope. You call or text, a live person answers, and we book a 2-3 hour window. We confirm square footage, year built, and any known comfort complaints - hot rooms, high bills, musty attic smell.
  2. 2
    Pre-test blower-door reading. We set up the blower door and measure CFM50, the single figure that tells us how leaky your envelope is. We also record outdoor temperature and wind speed because Georgetown’s spring northers can skew results.
  3. 3
    Thermal imaging and insulation inspection. Our FLIR camera maps surface temperatures across ceilings, walls, and duct runs. We check Owens Corning product depth, coverage, and contact with conditioned surfaces. Every anomaly gets a photo with a measurement.
  4. 4
    Duct leakage test if indicated. When the blower-door number suggests duct contribution, we pressurize the duct system and measure leakage to outside. Owens Corning homes from the 2015-2019 build wave often show 20-35% duct leakage in Georgetown - conditioned air dumped into the attic.
  5. 5
    Written findings and price. You get a documented photo record, the blower-door number, thermal images with temperature callouts, and a flat price for any recommended work. No work starts without your written approval - Haven Standard Clause 1.
  6. 6
    Post-work verification. On jobs we perform, we run a second blower-door test and hand you the before-and-after report showing measured improvement. Seal the holes first. Then we talk about R-value.
BeforeBefore
AfterAfter

What Owens Corning Home Energy Audit Costs in Georgetown

Service Typical Range What Moves It
Basic audit (blower door + thermal imaging) $280-$380 Home size under 2,500 sq ft, single HVAC system
Full audit with duct leakage test $420-$550 Multiple systems, zoned HVAC, or crawl space access required
Re-audit after our work $0 Included with any air-sealing or insulation job we complete

Homes over 4,000 square feet or with conditioned attic space add $80-$120 for extended test time. We also offer a Free Second Opinion on Any Written Estimate - bring us another contractor’s audit report and we’ll review their findings with you, no charge. Call (254) 970-2136 for your exact written price; estimates are free and we don’t start work until you have it in hand.

Why Georgetown Homeowners Call Topside Attic Insulation Georgetown for Owens Corning Work

Contractor trimming fiberglass insulation with a utility knife and straightedge.
Why Georgetown Homeowners Call Topside Attic Insulation Georgetown for Owens Corning Work

We’ve sealed and insulated over 9,000 homes since 2016, every one with a written price before work started and a documented record when the crew left. Our techs are background-checked, uniformed, and trained on Owens Corning’s full product line - but we also carry Reflectix and other brands, so our recommendation is based on what your home needs, not what we’re locked into selling.

The 365-Day Done Right Promise covers all work: if it’s not done right, we make it right. Under Haven Standard, you get a named technician, a text when they’re en route, and before-and-after blower-door numbers on every applicable job so you can verify the result yourself. Wes Okafor won’t sign off on any job until the photo record is complete and the homeowner has the written warranty in hand.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Insulation help in Georgetown? Licensed & insured · 1-hour response · free estimates
Call (254) 970-2136
Areas We Serve

Request a Free Estimate in Georgetown

Tell us what you need - Topside Attic Insulation Georgetown responds fast. No obligation.

By reaching out through this form, you confirm you have read our Privacy Policy and agree to be contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch