Owens Corning Wall Insulation Nationwide

Owens Corning Wall Insulation in Georgetown: What to Know First

We provide independent Owens Corning wall insulation service in Georgetown, Texas, with most jobs scheduled within 48 hours and completed in a single day. A typical drill-and-fill exterior wall job for a 2,000-square-foot Georgetown home runs between $3,200 and $5,800, depending on wall cavity depth and existing insulation condition. We are not affiliated with or authorized by Owens Corning - we are an independent service provider who sources materials from Owens Corning, Johns Manville, Knauf, Rockwool, and other manufacturers without proprietary lock-in.

Call (254) 970-2136

This page is for Georgetown homeowners who already have Owens Corning products in their walls and need injection foam, drill-and-fill retrofit, or exterior wall insulation work done right. Call (254) 970-2136 for a free estimate. Under Haven Standard Clause 1, you’ll receive a written price before any work starts.

How Owens Corning Products Fail - and How We Fix Them

• Ecotouch Pink Fiberglas settling in balloon-framed Georgetown walls. The 2×4 and 2×6 cavities in pre-1990 homes near Southwestern University often show 30-40% settlement after 15-20 years, creating a thermal bypass at the top plate. We pull the settled batts, foam-seal the top plate and electrical penetrations, then dense-pack with new material to the manufacturer’s specified weight per square foot.
• AttiCat blown-in system creating voids in kneewalls and dormers. The loose-fill application rate that works in open attics often bridges across stud bays in confined wall spaces, leaving shadow gaps. We diagnose this with thermal imaging, then switch to a slow-fill technique with calculated static pressure - or recommend a switch to stabilized cellulose if the cavity geometry demands it.
• ProPink High-R batts compressed by improper installation depth. When a previous installer wedged R-21 batts into a 2×6 cavity compressed to 5.5 inches, the effective R-value drops to roughly R-16. We measure actual cavity depth with a borescope, specify the correct batt thickness, and document the uncompressed loft with pre-installation photos.
• FOAMULAR NGX board shrinkage at rim joists in Sun City Georgetown homes. The newer NGX formula shifts dimensions more than legacy XPS under our summer attic temperatures above 140°F, opening gaps at the perimeter. We pull the boards, seal the rim joist with closed-cell spray foam to the subfloor, then reinstall with proper expansion gaps and compatible tape.
• FastBatT tape failure on interior soundproofing jobs. The pressure-sensitive adhesive degrades in the humidity swings common to Georgetown homes backing the San Gabriel River corridor, causing facing separation. We strip the failed tape, apply a mechanical fastening pattern, and specify a vapor-smart facing replacement where moisture drive warrants it.

Our Owens Corning Wall Insulation Process

1. 1
   Call and scope. A live person answers 24/7. We schedule a site visit, and Wes Okafor or a named technician arrives with a thermal camera, borescope, and blower-door rig.
2. 2
   Diagnose and document. We run a blower-door test - a pressurization reading that shows, in one number, how much air your building envelope is losing. Thermal images and cavity photos go into your file before anyone lifts a tool.
3. 3
   Written price and material spec. You get a flat price, written scope, and written warranty before work starts. Haven Standard Clause 1, no exceptions. We specify Owens Corning, Knauf, Rockwool, or another material based on what your walls actually need, not what we stock.
4. 4
   Seal first, then insulate. Every top plate, penetration, and rim joist gets foam-sealed before a single bag goes in. “Seal the holes first. Then we talk about R-value.”
5. 5
   Install and verify. Dense-pack to calculated weight, or batt to uncompressed loft. We run a post-job blower-door test and deliver before-and-after readings with your Documented Photo Record.
6. 6
   Close with warranty. The 365-Day Done Right Promise activates the moment we leave. Your written scope, warranty, and photo record are in hand.

Before

After

What Owens Corning Wall Insulation Costs in Georgetown

Three factors push any wall job toward the high end: homes in the Georgetown Historic District with lath-and-plaster walls requiring surgical repair; two-story exteriors where scaffolding or boom lift time adds labor; and concealed knob-and-tube wiring that must be routed around per local code. We will tell you which applies before you sign. Call (254) 970-2136 for your exact quote - estimates are free, and we offer a Free Second Opinion on any written estimate you bring us.

Why Georgetown Homeowners Call Topside Attic Insulation Georgetown for Owens Corning Work

We’ve sealed and insulated over 9,000 homes since 2016, and we publish before-and-after blower-door numbers on every applicable job so you can verify the performance change you paid for. Our technicians are background-checked, uniformed, and trained on Owens Corning’s full product line plus Knauf, Rockwool, Johns Manville, and Reflectix - so if your walls need something different, we won’t force a brand match.

Wes Okafor grew up on Chicago’s South Side and learned blower-door diagnostics at Olive-Harvey College before spending nearly two decades diagnosing air-sealing failures across Central Texas. He and his crew have worked attics from Sun City Georgetown to homes along the San Gabriel River corridor. Every job closes with a Documented Photo Record and, where applicable, measured duct-leakage numbers from the actual test, not an estimate.

FAQs