Fast, Reliable Blown-In Insulation Across Manor
Most blown-in insulation jobs in Manor run $1,800 to $4,200 for a typical attic top-up or full replacement, and we can usually get a crew out within 24 to 48 hours. Our dispatch team coordinates from our Austin office, but the crews serving Manor live and work in the eastern Travis County corridor. They know the difference between a ShadowGlen build from 2010 and a Presidential Meadows home from 2019, and they show up with the right material spec already in mind. If your August electric bill has you staring at the ceiling, call (254) 970-2136. We’ll send a written price before anyone lifts a tool.
Why Topside Attic Insulation Georgetown Is Manor’s Preferred Blown-In Insulation Company
We’ve sealed and insulated over 9,000 homes since 2016, and a growing share of them sit on Manor’s flat Blackland Prairie lots where the sun hits hard and the clay soil doesn’t quit moving. Our Manor customers leave reviews that mention specific things: the blower-door printout they hung on their fridge, the photo record showing their attic before and after, the written scope they signed before work started. That’s Haven Standard practice, not luck.
Response time to Manor is typically same-day or next-day for estimates, and we don’t hand you a callback window measured in business days. A live person answers our phones 24/7. Our technicians are background-checked, uniformed, and named in your appointment text. Under Haven Standard: Arrive on schedule, you get a named technician and a text when they are on the way.
The local knowledge that matters here isn’t just knowing FM 973 from US 290. It’s knowing that Manor’s fast-built tract homes were insulated to minimum code with R-30 fiberglass batts that settle at the edges, leaving top plates exposed. It’s knowing that expansive clay soil opens air leaks at wall-plate connections within five to ten years, even in homes that passed inspection. We don’t guess. We test, seal, then insulate, in that order.
Our Blown-In Insulation Services in Manor
Blown-In Cellulose
We use GreenFiber blown-in cellulose for most Manor attic top-ups. Cellulose handles the 150°F attic temperatures common on treeless Blackland Prairie lots better than you’d expect, and it packs into irregular joist bays more completely than batts. In ShadowGlen, we topped up a 2016 builder-grade R-30 fiberglass attic with GreenFiber blown-in cellulose after a blower-door test showed leakage at the wall-plate line and around the HVAC plenum - a pattern we see from Blackland Prairie clay movement. The homeowner’s August electric bill dropped noticeably the following summer, and we dense-packed the wall cavities while we were there. Cellulose also carries a Class 1 fire rating and resists pests, which matters in attics where roof rats have found their way in from the open prairie.
Blown-In Fiberglass
For homeowners who prefer fiberglass, we stock Owens Corning and Johns Manville loose-fill products with verified R-values per inch. Blown-in fiberglass works well in Manor’s newer homes with deeper joist bays where we can achieve R-38 to R-49 without compressing the material. We never blow fiberglass over unsealed top plates or can lights - that’s how you create a wind-washing problem where conditioned air moves through the insulation and defeats the R-value you just paid for. Our crews seal first, then blow.
Dense-Pack Wall Insulation
Manor’s slab-on-grade tract homes often have empty or poorly insulated wall cavities, especially in two-story builds where the second-floor walls were framed fast and insulated minimally. Dense-pack wall insulation fills these cavities with cellulose or fiberglass at 3.5 pounds per cubic foot - dense enough to resist settling and air movement, not so dense that it bulges drywall. For Presidential Meadows homes with vinyl siding, we remove a row of siding, drill access holes at stud-bay spacing, fill, patch, and replace. No full remodel needed. The blower-door test afterward shows the difference in a single number.
Blown-In Top-Up
This is our most common call in Manor. Builder-grade R-30 batts have settled to R-20 or less at the attic perimeter, and the center of the attic looks fluffy while the edges - where heat loss actually happens - are thin. A blown-in top-up brings the entire attic floor to uniform depth, typically R-38 to R-49 depending on your joist height. We price this by the square foot with a written scope that specifies target R-value, material type, and whether air sealing is included. Most Manor top-ups run $1,800 to $3,400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Manor
We source materials from Rockwool, CertainTeed, Icynene, and Demilec among others - no proprietary lock-in that limits your options. For Manor customers, this means we match the material to the house, not the other way around. Rockwool’s fire resistance and sound dampening work well for interior wall dense-packs in townhomes near ShadowGlen Elementary. CertainTeed’s fiberglass loose-fill hits spec for deeper attic builds. We stock local inventory for fast turnaround, and if your job calls for something specific, we order it without padding the price.
Common Blown-In Insulation Problems We See in Manor Homes
- Builder-grade R-30 fiberglass batts settle and leave the outer attic edges and top plates under-insulated. On treeless Blackland Prairie lots, attic temperatures push past 150°F in summer. The center of your attic looks fine. The edges, where the batt compressed against the roof trusses, are doing almost nothing.
- Expansive clay slab movement opens gaps at wall-plate connections and around MEP penetrations. Homes that passed insulation inspection at build-out develop measurable air leakage within five to ten years. The insulation is still there. It’s just not stopping air anymore.
- Minimal air sealing around plumbing penetrations in slab homes left many Manor residents with burst pipes during Winter Storm Uri. The same leaks that waste conditioned air in August let freezing air hit pipes in February. Insulation without sealing is only half the fix.
- HVAC plenums and duct boots pull loose from drywall ceilings. Fast construction in subdivisions like Presidential Meadows often means duct connections were taped, not mastic-sealed. The attic pulls conditioned air out of the house 24/7, and the homeowner pays for it.
Pricing for Blown-In Insulation in Manor, TX
Here’s what most Manor homeowners pay, based on actual jobs we’ve written scopes for in ShadowGlen, Presidential Meadows, and the newer builds along FM 973:
| Service | Typical Range |
|---|---|
| Blown-in attic top-up (R-30 to R-38) | $1,800 - $3,400 |
| Full attic replacement with air sealing | $3,200 - $5,800 |
| Dense-pack wall insulation (per sq ft of wall) | $2.80 - $4.50 |
| Blown-in cellulose, new construction depth | $2,400 - $4,200 |
| Air sealing + blower-door verification | $800 - $1,600 |
What moves the number: attic square footage, current insulation condition, whether we need to remove old material first, and how much air sealing the blower-door test reveals. Every estimate includes a written price, a written scope, and a written warranty before anyone starts - Haven Standard Clause 1. We also offer a Free Second Opinion on any written estimate from another contractor. Bring us their scope; we’ll read it with you.
We Also Serve Cities Near Manor
Our crews work the full eastern Travis and northern Bastrop County corridor. If you’re in Manor or nearby Pflugerville, Elgin, Hutto, or Austin, the same response times and pricing structure apply. Dispatch runs from our Austin office, but the trucks are already rolling east on US 290 most mornings.
Serving Manor, TX - Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Blown-In Insulation in Manor
Texas code minimums from the 2000s and 2010s required only R-30 attic insulation, and builders in fast-growing subdivisions like ShadowGlen and Presidential Meadows installed the cheapest batts that met that threshold. Those batts settle within a few years, especially at the attic perimeter where truss compression is tight, and they were never air-sealed at the top plates or can lights to begin with. Passing inspection just meant meeting code at the moment the inspector walked through. Call (254) 970-2136 for a free estimate - we’ll show you the blower-door numbers.
The heavy expansive clay soil under Manor’s slab homes swells when wet and shrinks when dry, causing subtle slab movement that opens gaps at wall-plate connections and around mechanical, electrical, and plumbing penetrations. Insulated homes still leak air within five to ten years, even though the insulation itself is intact. Our Blown-In Insulation team always runs a blower-door test first to find these leaks, seals them with caulk and foam, then blows insulation over a sealed surface. That’s the difference between insulation that performs and insulation that just sits there.
Cellulose, made from recycled paper treated with borate, packs tighter into irregular joist bays and resists air movement better at the same R-value. Fiberglass, typically Owens Corning or Johns Manville loose-fill, achieves higher R-value per inch and works well in deeper attics where compression isn’t a risk. For Manor’s hot, windy, treeless lots, we often recommend cellulose for top-ups over settled batts because it fills the gaps and edges better. The price difference is usually $200 to $400 for a typical attic. We’ll spec the right material for your joist depth and budget in the written scope.
Insulation alone does not prevent pipe bursts - air sealing does. During Uri, many Manor slab homes lost pipes because cold air leaked through unsealed plumbing penetrations in exterior walls and soffits, not because the insulation was missing. We address this by sealing top plates, sill plates, and penetrations before adding blown-in insulation, so the wall cavity stays closer to indoor temperature. If your home had freeze damage in 2021, we almost certainly need to inspect the air sealing before we quote insulation. Call (254) 970-2136 - estimates are free.
Yes. For homes with vinyl or fiber-cement siding, we remove one row, drill 2-inch access holes at each stud bay, dense-pack with cellulose or fiberglass at 3.5 pounds per cubic foot, patch the holes, and replace the siding. For brick homes, we drill through the mortar joints and tuckpoint afterward. Interior walls can be accessed through small drywall cuts behind baseboards, patched and painted to match. Most Presidential Meadows dense-packs run $2,800 to $4,600 for a 2,000-square-foot home. The blower-door test afterward proves the result.
Written by Wes Okafor, Owner at Topside Attic Insulation Georgetown, serving Manor and the eastern Travis County corridor since 2016.