Insulation in Shady Hollow, TX
Crawl space encapsulation and vapor barrier installation in Shady Hollow typically runs $3,800-$7,500 for homes in this 1970s-1990s master-planned community, where vented crawl spaces and slab-on-grade construction trap the humid Central Texas air that rises from the Balcones Escarpment clay soils. Most Shady Hollow homeowners who call us are dealing with musty first-floor odors, cupping hardwood, or springtime humidity readings above 70% in their crawl spaces - problems that worsen as original vapor barriers degrade after 30-plus years. We dispatch crews from our Austin office and carry Crawl Space Encapsulation & Vapor Barrier materials sized for the 1,800-2,800 square-foot footprints common in this neighborhood. Call (254) 970-2136 for a written price before any work starts.
Why Shady Hollow Homes Are Different
Shady Hollow sits in unincorporated Travis County, not inside Austin city limits, which means permit pathways and code enforcement differ from what contractors encounter on City of Austin projects just minutes away. The homes here - overwhelmingly single-family detached houses built between 1978 and the mid-1990s - were permitted to 1980s energy codes requiring minimal insulation, leaving attics, walls, and crawl spaces dramatically below current Climate Zone 2 standards.
The Balcones Escarpment transition zone subjects these homes to attic temperatures of 140-160°F in summer, while the dense live-oak and cedar-elm canopy that gives the neighborhood its name deposits decades of organic debris into vented soffits. We regularly find compressed, moisture-damaged batt insulation at eave perimeters on thermal scans of 1980s Shady Hollow homes. The February 2021 Winter Storm Uri also exposed how poorly insulated pipe cavities and exterior walls in these older homes perform during rare hard freezes.
Because Austin Energy rebate eligibility must be confirmed by service address rather than assumed, we verify this during our initial consultation for Shady Hollow homeowners interested in utility incentives.
Our Main Shady Hollow Services
Shady Hollow homeowners contact us most often about attic insulation and spray foam - the two services that address the most visible symptoms of 40-year-old building envelopes in this climate.
Attic Insulation in Shady Hollow
Most Shady Hollow attics we inspect carry original blown-in fiberglass or batts compressed to effective R-values well below the R-38 to R-60 Austin Energy recommends for Climate Zone 2. We remove the degraded material, seal top plates and penetrations, then install new insulation to documented depth with a written price locked before work begins. Every attic job includes a Attic Insulation in Shady Hollow photo record and, where applicable, before-and-after blower-door readings.
Spray Foam Insulation in Shady Hollow
Spray foam excels in Shady Hollow’s complex rooflines and bonus rooms where conventional batts leave thermal bypasses. We specify open-cell foam for most attic applications and closed-cell for rim joists and crawl spaces, sourced from Icynene and Demilec with no proprietary lock-in. Our crews air-seal first, then foam - never the reverse. See our full Spray Foam Insulation in Shady Hollow page for application details and blower-door documentation protocol.
Blown-In Insulation in Shady Hollow
Blown-in fiberglass or cellulose - we stock GreenFiber cellulose and Owens Corning fiberglass - is the most cost-effective way to bring a settled 1980s Shady Hollow attic up to modern R-value. We calculate precise coverage rates accounting for your existing insulation depth, then install to a mapped, verified depth with density markers. The job includes a Blown-In Insulation in Shady Hollow written scope and photo record under Haven Standard Clause 1.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterCrawl Space Encapsulation & Vapor Barrier in Shady Hollow
Crawl space encapsulation and vapor barrier installation in Shady Hollow addresses a specific failure pattern in this neighborhood’s 30-45-year-old homes: vented crawl spaces that were never properly isolated from Central Texas humidity, allowing moisture to migrate upward through slab edges and rim joists into conditioned space. Because Shady Hollow’s clay soils retain moisture through the spring and fall shoulder seasons, we regularly encounter crawl spaces with relative humidity sustained above 75%, accelerating floor joist decay and mold colonization on organic debris that accumulates over decades. Our Crawl Space Encapsulation & Vapor Barrier crews treat this as a building envelope repair, not a product installation, with written scope and warranty delivered before anyone enters the crawl space.
Crawl Space Vapor Barrier
Signs you need it
Your first floor smells musty in humid months, hardwood is cupping at the perimeter, or you can see bare soil or torn polyethylene through the crawl space access door.
What it costs in Shady Hollow
A ground-only vapor barrier replacement in a typical Shady Hollow crawl space runs $1,200-$2,800, while full encapsulation with sealed walls and dehumidification ranges $3,800-$7,500 depending on square footage and access difficulty.
How we do it
We remove organic debris, treat visible mold with EPA-registered cleaner, seam-seal 12-mil reinforced polyethylene to foundation walls and piers, then install a dedicated dehumidifier with condensate pump to a daylight drain.
Crawl Space Encapsulation
Signs you need it
Insulation is falling from floor joists, metal fasteners show rust, or your HVAC ducts in the crawl space sweat during cooling season.
What it costs in Shady Hollow
Complete encapsulation with wall insulation, sealed rim joists, and mechanical dehumidification for a 2,000-square-foot Shady Hollow home typically falls between $4,500 and $8,200.
How we do it
We seal all vents, insulate rim joists with closed-cell foam, apply vapor barrier to walls and floor as a continuous system, then commission a dehumidifier sized to the crawl space volume and document final humidity readings.
What Crawl Space Encapsulation & Vapor Barrier Costs in Shady Hollow
| Item | Typical range in Shady Hollow |
|---|---|
| Ground vapor barrier only (6-mil replacement) | $1,200 - $2,800 |
| Full encapsulation with wall sealing | $3,800 - $7,500 |
| Encapsulation with dehumidifier & rim joist foam | $4,500 - $8,200 |
How long does crawl space encapsulation take in Shady Hollow?
Most Shady Hollow crawl spaces are completed in two to three days: one day for prep, cleaning, and sealing, plus one day for insulation and dehumidifier installation, with a final commissioning visit to verify humidity control. Call (254) 970-2136 for a written price and timeline specific to your home.
Will encapsulation affect my foundation ventilation requirements?
Unincorporated Travis County permits unvented conditioned crawl spaces when mechanical dehumidification is provided, which is how we design every Shady Hollow encapsulation system. We document the sealed-vent configuration on your photo record for future inspection or sale disclosure.
Radiant Barrier Installation in Shady Hollow
Radiant barrier installation in Shady Hollow targets the specific thermal load these 1970s-1990s homes face: attic temperatures reaching 140-160°F on summer afternoons, forcing air conditioning systems to run continuously to overcome radiant heat gain through the roof deck. While the neighborhood’s mature live-oak canopy provides meaningful afternoon shade on west-facing rooflines, the thermal mass of asphalt shingles and inadequate attic ventilation still drives cooling costs 25-40% higher than in homes with proper radiant barrier and ventilation balance. Our Radiant Barrier Installation crews measure existing attic ventilation rates before specifying product, because a radiant barrier without adequate exhaust airflow can trap moisture in Shady Hollow’s humid shoulder seasons.
Attic Radiant Barrier
Signs you need it
Your upstairs rooms stay hot past 10 p.m., your AC runs non-stop from 2-7 p.m. in July, or ductwork in the attic feels hot to the touch.
What it costs in Shady Hollow
Radiant barrier installation in a typical Shady Hollow attic runs $1,800-$3,400 for foil stapled to rafters, or $2,400-$4,200 for a roof-deck applied product with ventilation upgrade.
How we do it
We calculate your attic’s net free ventilation area, install baffles at eaves to maintain airflow, then apply perforated radiant barrier foil with a 3/4-inch air gap to rafter bottoms or directly to the roof deck per manufacturer specification.
Radiant Barrier & Ventilation
Signs you need it
You’ve added radiant barrier before but attic temperatures remain high, or soffit vents are blocked by insulation and ridge vents were never cut in during original construction.
What it costs in Shady Hollow
Combined radiant barrier with balanced ventilation correction - adding or clearing soffit intake and installing ridge or powered exhaust - typically ranges $2,800-$5,200 in Shady Hollow homes.
How we do it
We open or add soffit vents, install proper baffles, cut continuous ridge vent or specify powered attic ventilators where geometry prevents passive flow, then apply radiant barrier with documented before-and-after attic temperature readings.
What Radiant Barrier Installation Costs in Shady Hollow
| Item | Typical range in Shady Hollow |
|---|---|
| Foil radiant barrier, rafter-applied | $1,800 - $3,400 |
| Roof-deck radiant barrier product | $2,400 - $4,200 |
| Radiant barrier with ventilation correction | $2,800 - $5,200 |
Does radiant barrier work with Shady Hollow’s tree canopy?
Yes - afternoon shade reduces peak load but does not eliminate the infrared radiation that heats your attic mass; we measure this on every Shady Hollow job and document the actual temperature reduction. Call (254) 970-2136 for a free estimate with written price.
Can radiant barrier be added over existing insulation?
We install radiant barrier to the roof structure, never on top of floor insulation where it would compress the thermal layer and trap moisture; our written scope specifies the correct application for your attic geometry.
Insulation Removal & Replacement in Shady Hollow
Insulation removal and replacement in Shady Hollow is most often triggered by the condition of 40-year-old original material: blown-in fiberglass that has settled from R-30 to effective R-15 or below, batts degraded by roof leaks or rodent activity, or organic debris accumulation from the neighborhood’s dense canopy. We regularly remove insulation from Shady Hollow attics that contains decades of live-oak leaf litter, cedar-elm seeds, and evidence of past rodent harborage - material that no longer performs thermally and may harbor allergens. Our Insulation Removal & Replacement process includes negative-air containment and HEPA filtration, with a written disposal record provided under Haven Standard documentation requirements.
Attic Insulation Removal
Signs you need it
You can see gray or black discoloration on insulation, smell mustiness when the HVAC runs, or your energy bills have risen 20% or more with no rate change.
What it costs in Shady Hollow
Attic insulation removal in a typical 2,000-square-foot Shady Hollow home runs $1,400-$2,800, with replacement adding $2,200-$4,600 depending on material and target R-value.
How we do it
We seal the attic hatch, run negative-air scrubbers, remove all existing material to bagged disposal, inspect and photo-document the deck condition, then install new insulation to specified depth with verified coverage.
Contaminated Insulation Removal
Signs you need it
You’ve found rodent droppings, nesting material, or urine staining in the attic, or a home inspector flagged vermiculite or asbestos-suspect material in a pre-sale report.
What it costs in Shady Hollow
Contaminated insulation removal with full PPE, HEPA containment, and third-party clearance testing ranges $2,800-$5,500 in Shady Hollow, with replacement quoted separately after clearance.
How we do it
We establish OSHA-compliant containment, remove material under negative pressure, apply enzymatic decontaminant to substrates, obtain independent air-quality clearance, then provide written documentation for your insurance or sale disclosure file.
What Insulation Removal & Replacement Costs in Shady Hollow
| Item | Typical range in Shady Hollow |
|---|---|
| Standard attic insulation removal | $1,400 - $2,800 |
| Contaminated material removal with clearance | $2,800 - $5,500 |
| Removal plus replacement to R-38 or R-49 | $3,600 - $7,400 |
How do I know if my Shady Hollow insulation needs removal or just topping off?
We inspect for moisture damage, pest evidence, and compression below 50% of original thickness; if any are present, removal is required - otherwise we document existing depth and calculate precise top-off volume. Call (254) 970-2136 for this inspection at no charge.
Is asbestos a concern in 1980s Shady Hollow insulation?
Vermiculite insulation installed before 1990 may contain asbestos; we test suspect material before disturbing it and, if positive, refer to licensed abatement with written documentation for your records.
Attic Air Sealing in Shady Hollow
Attic air sealing in Shady Hollow is the single most cost-effective improvement for homes built to 1980s energy codes, where top plates, electrical penetrations, and can-light housings were never sealed during original construction. We regularly measure blower-door results of 3,500-5,000 CFM50 in pre-1995 Shady Hollow homes - meaning the building envelope leaks the equivalent of an open window even when all doors and windows are closed. Our Attic Air Sealing crews complete this work before any insulation is added; under our sealed-first-then-insulated protocol, we will never blow new material over an unsealed attic floor, as this buries access to the leaks that matter most.
Top Plate & Penetration Sealing
Signs you need it
Dust streaks around ceiling outlets in winter, rooms that are hard to heat evenly, or icicles on roof edges during rare freezes while the attic has no visible insulation gaps.
What it costs in Shady Hollow
Comprehensive top-plate and penetration sealing in a typical Shady Hollow attic runs $1,600-$3,200, with blower-door testing included to verify the reduction in envelope leakage.
How we do it
We remove existing insulation along plate lines, apply fire-rated acrylic sealant to all top-plate joints and wire penetrations, seal plumbing vent stacks with proper collars, then replace insulation and re-test with the blower door to document CFM50 reduction.
Can Light & Duct Boot Sealing
Signs you need it
Can lights flicker in windy weather, you feel drafts from ceiling fixtures, or HVAC airflow at registers drops significantly when the attic is hot.
What it costs in Shady Hollow
Sealing accessible can lights with fire-rated covers and mastic-sealing duct boots runs $800-$1,800 in most Shady Hollow homes, with larger homes or complex duct layouts toward the higher end.
How we do it
We install pre-formed fire-rated enclosures over each can light, seal with fire-stop caulk, then apply fiber-reinforced mastic to all duct boot connections and support with mechanical straps where sagging has opened gaps.
What Attic Air Sealing Costs in Shady Hollow
| Item | Typical range in Shady Hollow |
|---|---|
| Top plate & penetration sealing with blower-door test | $1,600 - $3,200 |
| Can light & duct boot sealing | $800 - $1,800 |
| Full attic air sealing (comprehensive) | $2,400 - $4,800 |
Will air sealing make my Shady Hollow home too tight?
No - we target reduction to mechanical ventilation standards, not zero, and we never seal combustion appliance zones without verifying makeup air; your blower-door result and target are written on your scope before work begins. Call (254) 970-2136 for a free estimate.
Can air sealing be done without removing all my attic insulation?
We temporarily roll back material along seal lines, complete the work, then replace it to original depth - your photo record shows before, during, and after positions so you can verify nothing was lost or compressed.
Wall Insulation in Shady Hollow
Wall insulation in Shady Hollow addresses the exterior walls of 1978-1995 homes that were built with empty stud cavities or minimal R-11 batts - far below the R-15 to R-21 recommended for Climate Zone 2. The February 2021 freeze demonstrated how poorly these walls perform when outdoor temperatures drop below 20°F for extended periods, with pipe cavities in exterior walls particularly vulnerable. Our Wall Insulation crews use injection foam or dense-pack cellulose techniques that fill cavities without removing interior drywall, preserving the original finishes that characterize Shady Hollow’s established neighborhood aesthetic.
Injection Foam Wall Insulation
Signs you need it
Exterior walls feel hot to the touch in summer, cold in winter, or you can hear outdoor noise clearly through closed windows - all indicate empty or degraded cavity insulation.
What it costs in Shady Hollow
Injection foam wall insulation for a typical 2,000-square-foot Shady Hollow home runs $3,200-$6,400 depending on wall area, cavity condition, and access for hose placement.
How we do it
We drill 5/8-inch holes at stud-bay intervals from the exterior, inject slow-rise foam to fill without bowing studs, then plug with color-matched siding plugs or stucco patches that we source to match common Shady Hollow exterior finishes.
Drill & Fill Wall Insulation
Signs you need it
Your home has aluminum siding or original hardboard with known empty walls, or an energy audit confirmed significant thermal bypass at the wall assembly.
What it costs in Shady Hollow
Dense-pack cellulose drill-and-fill for exterior walls in Shady Hollow typically ranges $2,800-$5,200, with brick veneer or multi-story construction adding complexity.
How we do it
We remove a brick or siding unit at each bay, drill through the sheathing, dense-pack GreenFiber cellulose to 3.5 pounds per cubic foot with verified fill tubes, then restore the exterior with matched materials and photo-document each location.
What Wall Insulation Costs in Shady Hollow
| Item | Typical range in Shady Hollow |
|---|---|
| Injection foam, exterior walls | $3,200 - $6,400 |
| Dense-pack cellulose drill-and-fill | $2,800 - $5,200 |
| Interior wall soundproofing (per room) | $1,400 - $2,800 |
Will injection foam damage my Shady Hollow home’s exterior?
We drill from the exterior to preserve interior finishes, then plug with matched materials; on brick homes we source replacement bricks from local salvage to match the weathered patina common in this neighborhood. Call (254) 970-2136 for a written scope and price.
Can wall insulation help with the February freeze risk?
Filled wall cavities slow heat loss to exterior pipe chases, but we also recommend specific pipe insulation and air-sealing at hose bibs as part of a complete freeze-protection assessment - documented in your written scope.
Attic Cleaning & Rodent Proofing in Shady Hollow
Attic cleaning and rodent proofing in Shady Hollow responds to a specific local condition: the mature live-oak and cedar-elm canopy that provides afternoon shade also supports squirrel, roof rat, and raccoon populations that access vented soffits and roof returns common on 1980s construction. We regularly find decades of organic debris, compromised vapor barriers, and rodent harborage in Shady Hollow attics where original construction left gaps at eaves and ridge vents. Our Attic Cleaning & Rodent Proofing service includes complete decontamination, structural disinfection, and mechanical exclusion - not trapping alone, which leaves the access points open for re-entry.
Attic Sanitizing & Decontamination
Signs you need it
You smell ammonia or musk when the HVAC runs, find droppings or nesting material in the attic, or see stained ceiling drywall near light fixtures.
What it costs in Shady Hollow
Attic sanitizing and decontamination with HEPA vacuuming, enzymatic treatment, and disposal of contaminated insulation runs $1,800-$3,600 in typical Shady Hollow homes.
How we do it
We establish negative-air containment, remove all contaminated material to bagged disposal, HEPA-vacuum structural surfaces, apply EPA-registered disinfectant, then provide written clearance documentation and photo record.
Rodent Proofing & Exclusion
Signs you need it
You hear scratching at dawn or dusk, find gnawed soffit vents, or have had repeated trapping services without resolving the underlying access.
What it costs in Shady Hollow
Mechanical rodent exclusion with galvanized steel mesh, concrete patching, and one-way exit devices at active entry points ranges $1,200-$2,800 for Shady Hollow homes, with follow-up inspection included.
How we do it
We perform a dawn/dusk exterior inspection to identify active access, install one-way exits, seal all gaps larger than 1/4 inch with rodent-proof materials, then return to verify no new activity and remove exit devices.
What Attic Cleaning & Rodent Proofing Costs in Shady Hollow
| Item | Typical range in Shady Hollow |
|---|---|
| Attic sanitizing & decontamination | $1,800 - $3,600 |
| Rodent proofing & exclusion | $1,200 - $2,800 |
| Full attic restoration (cleaning + exclusion + re-insulation) | $4,200 - $8,600 |
How do I know if rodents are currently in my Shady Hollow attic?
Fresh droppings are dark and moist, older ones gray and crumbly; we inspect for both, plus tracking patterns in dust and gnaw marks on wiring or PVC vent stacks - documented in your photo record. Call (254) 970-2136 for inspection.
Will rodent proofing affect my attic ventilation?
We use rodent-proof mesh that maintains required net free area on soffit and ridge vents, and we document the before-and-after ventilation calculation on your written scope so future inspectors can verify compliance.
Home Energy Audit in Shady Hollow
A home energy audit in Shady Hollow provides the diagnostic foundation for every other service on this page, identifying which of your 1980s building envelope deficiencies are costing you the most and in what order they should be addressed. We regularly find that Shady Hollow homeowners have been quoted insulation upgrades without any measurement of actual air leakage, resulting in new material installed over unsealed bypasses that continue to waste conditioned air. Our Home Energy Audit includes blower-door testing, thermal imaging, and combustion safety verification - with a written report that prioritizes repairs by cost-effectiveness and documents current conditions for future comparison.
Blower Door Test
Signs you need it
Your energy bills are high with no clear cause, rooms are unevenly heated or cooled, or you’re considering any insulation upgrade and want to verify the building envelope first.
What it costs in Shady Hollow
A standalone blower-door test with written report runs $350-$600 in Shady Hollow, or is included at no charge when bundled with a proposed scope of work under Haven Standard Clause 1.
How we do it
We install a calibrated fan in an exterior door, depressurize the house to 50 Pascals, measure CFM50 leakage, then use smoke pencils and thermal imaging to locate the dominant leak paths while the house is under test.
Thermal Imaging Inspection
Signs you need it
You suspect missing insulation in walls or cathedral ceilings, have had ice damming or moisture staining, or want to verify contractor claims about insulation coverage.
What it costs in Shady Hollow
Thermal imaging as part of a complete energy audit runs $450-$750 in Shady Hollow, with the infrared survey typically requiring a 15-20 degree temperature difference between indoors and outdoors for valid readings.
How we do it
We scan all building envelope surfaces with a calibrated FLIR camera during blower-door depressurization, mark thermal anomalies on photos, then interpret patterns to distinguish missing insulation from air leakage versus moisture intrusion.
What Home Energy Audit Costs in Shady Hollow
| Item | Typical range in Shady Hollow |
|---|---|
| Blower-door test with written report | $350 - $600 |
| Full energy audit (blower door + thermal + duct test) | $450 - $750 |
| Comprehensive audit with prioritized scope & ROI analysis | $600 - $950 |
Will an energy audit tell me if Austin Energy rebates apply?
We verify your service address against current Austin Energy rebate eligibility during the audit consultation, then note confirmed or unconfirmed status on your written report so you can pursue incentives with documentation in hand. Call (254) 970-2136 to schedule.
How long does a Shady Hollow energy audit take?
Plan on two to three hours for a full audit: one hour for exterior and interior inspection, one hour for blower-door and thermal testing, and 30 minutes for preliminary findings with your written report delivered within 48 hours.
Brands We Service in Shady Hollow
We source insulation and air-sealing materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber - no proprietary lock-in means we specify the right product for your Shady Hollow home’s specific condition. Our Austin office stocks common densities and R-values for same-day starts on most jobs. See our brands for full specifications and warranty terms by manufacturer.
Pricing for Insulation in Shady Hollow, TX
| Service | Typical range in Shady Hollow |
|---|---|
| Crawl space vapor barrier (ground only) | $1,200 - $2,800 |
| Full crawl space encapsulation | $3,800 - $7,500 |
| Radiant barrier, rafter-applied | $1,800 - $3,400 |
| Radiant barrier with ventilation correction | $2,800 - $5,200 |
| Attic insulation removal | $1,400 - $2,800 |
| Contaminated insulation removal | $2,800 - $5,500 |
| Attic air sealing (comprehensive) | $2,400 - $4,800 |
| Injection foam wall insulation | $3,200 - $6,400 |
| Attic sanitizing & decontamination | $1,800 - $3,600 |
| Rodent proofing & exclusion | $1,200 - $2,800 |
| Full energy audit with thermal imaging | $450 - $750 |
Prices in Shady Hollow push toward the higher end when crawl spaces have limited access, attics contain vermiculite or asbestos-suspect material requiring testing, or wall cavities are blocked by fire stops or plumbing stacks that require additional access points. Every job begins with a written price under Haven Standard Clause 1 - flat scope, flat number, delivered before anyone lifts a tool - and we provide a Free Second Opinion on any competing written estimate.
Neighborhoods We Serve in Shady Hollow
Our crews work throughout the Shady Hollow master-planned community and adjacent unincorporated Travis County areas, with dispatch from our Austin office providing same-day response for most service requests. These are the neighborhoods and sub-areas we most commonly serve:
- Shady Hollow Estates (original 1978-1985 section)
- Shady Hollow West (mid-1980s to early 1990s builds)
- Shady Hollow Village (late-phase construction, mid-1990s)
- Travis Country West (adjacent unincorporated area)
- Circle C Ranch vicinity (unincorporated pockets near Shady Hollow)
Response time from dispatch to arrival is typically 45-90 minutes for Shady Hollow addresses during standard scheduling windows.
Service Area - Cities Near Shady Hollow
We serve Shady Hollow from our Austin office and regularly work in surrounding communities including Georgetown, TX, Round Rock, TX, Brushy Creek, TX, and Leander, TX. Dispatch and scheduling are coordinated centrally; crews carry materials for the full building envelope service line and arrive with the equipment needed to complete most Shady Hollow jobs without return trips.
Serving Shady Hollow, TX - Our Local Coverage Area
We’re based in the Shady Hollow area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Shady Hollow
Unincorporated Travis County requires permits for structural modifications and spray foam applications but not for blown-in insulation top-offs or batt replacement in existing attics; we verify permit requirements for your specific scope and include any fees in your written price before work starts.
Most Shady Hollow homeowners receive a written estimate within 48 hours of calling, with standard jobs scheduled within one to two weeks and emergency situations - active roof leaks, post-storm damage, or HVAC failure related to attic conditions - addressed same day or next day depending on crew availability.
Yes - all work in Shady Hollow is covered under our 365-Day Done Right Promise: if it’s not done right, we make it right, backed by the written scope and warranty delivered before anyone started, with no deductible or service fee for callback visits.
Call (254) 970-2136 today for a free estimate with a written price before any work starts. A live person answers 24/7.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Shady Hollow Customers Say
"They air-sealed the attic floor before insulating and showed me the blower-door number before and after. The upstairs is finally the same temperature as downstairs."
- Marisol D."They photographed rodent damage in the old insulation that we had no idea about, and priced the exclusion work separately so we could decide."
- Harriet N."Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."
- Ainsley P.